MPPT 30A mppt 30 Solar charge controller, 12v 24v 48v auto work with LCD,DC loads Ctrl, battery temperature sensor cable RS232
Dear customer,
Welcome to our store, the home of green energy.
We spend 4 years to develop MPPT solar charge controller.
To provide our power for clean energy .Green world, we need you.
I-P-SMART2-12V/24V/48V-20A 25A 30A
This is a smart solar charge controller which has advanced MPPT technology. Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller, makes 30% more charge current with significantly less power than tradition controllers. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice (Vented, Sealed, Gel, NiCd) It have features such as 12V 24V 48V auto recognition, wide range of PV input voltage, RS232 and LAN communication function etc.
Application
1) Solar off-grid energy generation system
2) Solar energy/utility power complementary power generation system
Working System
Language System
New Product I-P-SMART2-12V/24V/48V-20A 25A 30A
1.High conversion efficiency maximum 99%,
2.12v/24v/48v system auto recognition.
3. Maximum PV Input Voltage DC150V
4.Maximum PV Input Power 1716W
5.Battery standard optional Types (Vented ,Sealed,Gel,NiCd) Other types of battery can be defined by users.
6.Fast charge/Constant charge/Floating charge three model charge the batteries
7.RS232 Communication port and extensible LAN remote control
9.4 kinds of DC load control: Time Ctrl, PV&Time Ctrl, PV Volt Ctrl, ON Mode, OFF Mode
10. 1.5M Battery Temperature Sensor Wires.
11.Information: Total PV generating power.
12.LCD & LED show all the parameters. (4 Buttons )
| Model: I-P-SMART2-12V/24V/48V-20A/25A/30A |
20A |
25A |
30A |
| Charge Mode |
Maximum Power Point Tracking |
| Method |
3 stages: fast charge(MPPT),constant voltage, floating charge |
| System Type |
12V 24V 48V Automatic recognition |
| System Voltage |
12V system |
DC9V~DC15V |
| 24V system |
DC18V~DC30V |
| 48Vsystem |
DC36V~DC60V |
| Soft Start Time |
≤10S |
| Dynamic Response |
500us |
| Recovery Time |
| Conversion Efficiency |
≥96.5%,≤99% |
| PV Modules Utilization Rate |
≥99% |
| Input Characteristics |
| MPPT Working Voltage and Range |
12V system |
DC18V~DC150V |
| 24V system |
DC34~DC150V |
| 48V system |
DC65~DC150V |
| Low Voltage Input Protection Point |
12V system |
DC16V |
| 24V system |
DC30V |
| 48V system |
DC60V |
| Low Voltage Input Recovery Point |
12V system |
DC22V |
| 24V system |
DC34V |
| 48V system |
DC65V |
| Max DC Voltage |
DC160V |
| Input Overvoltage Protection Point |
DC150V |
| Input Overvoltage Recovery Point |
DC145V |
| Max. PV Power |
12V system |
286W |
357W |
429W |
| 24V system |
572W |
715W |
858W |
| 48V system |
1144W |
1430W |
1716W |
| Output Characteristics |
| Selectable Battery Types (Default type is GEL battery) |
Sealed lead acid, vented, Gel, NiCd battery |
| (Other types of the batteries also can be defined) |
| Constant Voltage |
Please check the charge voltage according to the battery type form. |
| Floating Charge Voltage |
| Over Charge Protection Voltage |
12V system |
14.6V |
| 24V system |
29.2V |
| 48V system |
58.4V |
| Rated Output Current |
20A |
25A |
30A |
| Current-limiting Protection |
25A |
30A |
35A |
| Rate charge current |
20A |
25A |
30A |
| Temperature Factor |
±0.02%/ |
| Temperature Compensation |
14.2V-(The highest temperature-25)*0.3 |
| Output Ripples(peak) |
200mV |
| Output Voltage Stability Precision |
≤±1.5% |
| Charge voltage Peak-Peak Ripple |
200mV |
| Charger voltage accuracy |
≤±1.5% |
| Discharge characteristic |
| Setting Control |
Controller or LAN or RS232 |
| Max discharge current |
30A |
| Max discharge power |
420W |
840W |
1680W |
| Discharge protection |
fuse 40A*2 |
| Double-time control |
On in morning ,off in morning / On in night ,off in night |
| ON / OFF mode |
ON / OFF |
| PV voltage control |
PV voltage on, PV voltage off |
| PV voltage / time delay control |
PV voltage on, time delay off |
| Discharge voltage protection |
Output off when it under setting voltage; Factory set is 10.5V ( Note : set based on 1 battery ) |
| Communication Features |
| RS232 Communication |
Chose COM communication |
| LAN Communication |
Set IP and Gate address for controller and solar eagle ;Then chose TCP communication |
| Protection |
| Input Low Voltage Protection |
yes |
| Input Overvoltage Protection |
| Input Polarity Reversal Protection |
| Output Overvoltage Protection |
| Output Polarity Reversal Protection |
| Short-circuit Protection |
Recover after eliminating the Short-circuit fault, no problem for long term Short-circuit |
| Temperature Protection |
95degree |
| Temperature protection |
Above 85,decrease the output power, decrease 3A per degree. |
| Other Parameters |
| Noise |
≤40dB |
| Thermal methods |
Forced air cooling, fan speed rate regulated by temperature, when inner temperature is too low, fan ran slowly or stop; when controller stop working, fan also stop ran. |
| Components |
World brand raw materials. Compliance with EU standards. All rated temperature of electrolytic capacitors not less than 105 |
| Smell |
No peculiar smell and toxic substances |
| Environment Protection |
Meet the 2002/95/EC,no cadmium hydride and fluoride |
| Physical |
| Measurement DxWxH (mm) |
265*195*110 |
| N.G(kg) |
2.1 |
| G.N(kg) |
2.7 |
| Color |
Blue/Green (optional) |
| Safety |
CE, RoHS, PSE,FCC |
| EMC |
EN61000 |
| Type of Mechanical Protection |
IP21 |
| Environment |
| Humidity |
0~90%RH ( no condense) |
| Altitude |
0~3000m |
| Operating Temperature |
-20 ~ +40 |
| Storage Temperature |
-40 ~ +75 |
| Atmospheric Pressure |
70~106kPa |
We accept alipay here.
All major credit cards are accepted through secure payment process.
1). Shipping cost: Click “Shipping and payment” tab on the product detail page, and you will see the delivery details. You can see the shipping cost by entering the required information.
2). Item Processing Time: The processing time for a specific order varies with the product type and stock status. Mostly, processing time be 3 to 15 working days.
We provide 2 year warranty. If the item is defective, please notify us within 7 days of delivery. All items must be returned in their original condition, in order to qualify for a refund or exchange of goods. But shipping fee and insurance is not refundable.
Items returned after 7 days of delivery are only eligible for repair. The buyer is responsible for all shipping costs incurred.
We depend on our Alibaba reputation and customer satisfaction to succeed. Therefore, your feedback is extremely important to us.
If you love my items please leave me good feedback. Your action will help us offer our milk and bread. I will do the same for you.
Please contact us before leaving any negative of neutral feedback. We will work with you to solve any problems.
All emails will be answered within 24 hours.
Please leave a message in the Trade Manager (TM: wipanda).
Tel: 0086-755-23091101 Fax: 0086-755-23091102
Skype: wipanda-una MSN:wipanda-unaAThotmail.com Mail: unaATwipanda.com
If you have any idea, please let us know. We will try our best to help you.
Looking forward to your cooperation
Thanks!
Note: This model have 2 color( blue and green ) , when you order please tell us your favorite color .
